Prior to the Winter season in New Jersey, we recommend scheduling a furnace tune-up and cleaning service appointment to ensure your system is operating properly. Our team of HVAC technicians will help you lower your monthly energy costs and improve your house’s efficiency. Furnace tune-up and repair will ensure your equipment is operating safely in your home. We offer furnace tune-up near you in areas such as Trenton, Tom’s River, Brick, Elizabeth, Manalapan, Old Bridge, and Princeton, New Jersey.
We all like to save a little extra money, and Team Electric, Plumbing & Air offers an annual furnace cleaning services to make sure your heating system outlasts the freezing New Jersey temperatures.
Our 18 Step Furnace Tune-Up Inspection
Furnaces can be prone to wear and tear, just like any other mechanical system. It’s important to hire a professional furnace tune-up company near you in New Jersey to avoid costly breakdowns. If one part of your heating system fails, you could face several days without heat! In addition to heating services, our staff also offers plumbing solutions such as sump pump repair, water line installation, drain cleaning, gas line repair, tankless water heater installation, and boiler repair. Give us a call by phone at (732) 201-3305 to receive help with a project.
Below is a summary of our annual 18 point furnace tune-up and cleaning service. This gives a general idea to how many pieces of the heating system must work together to create the warm air that circulates your home or office.
- Clean or replace air filters
- Check and clean burners
- Inspect and clean pilot assembly
- Clean manifold and burner tray area
- Inspect blower wheel for cleanliness
- Lubricate blower motor as necessary
- Inspect the air passages of open motors, clean
- Check diverter box and vent systems
- Visually inspect heat exchanger, vacuum clean if accessible
- Clean and vacuum furnace cabinet
- Inspect furnace electrical and wiring
- Check CO level
- Check thermostat
- Start and test furnace (by thermostat)
- Check temperature rise
- Check operation of safety controls
- Check burner combustion
- Check for proper combustion air
Note: This report reflects the condition of the above-described equipment/system at the time of inspection only and does not represent any guarantee(s) of any type.
6 Important Steps of a Furnace Tune-Up
Examine the Primary Heat Exchanger
The primary heat exchanger in your furnace is designed to release heat into the incoming cold air that is collected by the return air ducts. As the cold air is pushed over the exterior of the heat exchanger, it’s temperature will start to increase as it collects heat energy. The primary heat exchanger is the main component of a furnace that is utilized to circulate heat into the air. We offer furnace tune-up services to homes in Trenton and other areas of New Jersey. Our team of technicians will perform a visual inspection of the heat exchanger to confirm if it’s cracked or damaged. If the heat exchanger is covered in dirt, we will use a vacuum to eliminate the contaminants.
The main cause of issues with gas burners is excess dirt and misalignment. As your furnace operates during the winter season, dirt and dust will begin to accumulate in the slots of each gas burner. Each of the slots align with the surrounding burners in your furnace. Once a gas burner becomes contaminated, you may encounter issues such as delayed ignition and high carbon monoxide levels during the first minute of operation. If your furnace is taking a long period of time to ignite, give our team of certified technicians a call at (732) 201-3305 to become familiar with our furnace tune-up services. We will eliminate the delayed ignition issues by using a firm brush to remove dirt and dust from the slots of your gas burners. In addition, our team may utilize high air pressure to extract dirt and debris from the gas burners.
Inspect the CO Levels
Our team of certified contractors will utilize a combustion inspection device to record the CO levels in your furnace throughout the first minute of operation. The CO ratings of a standard gas furnace will vary from 100 to 400 ppm. If your furnace is producing high gas levels of 400 ppm or higher, our technicians will deactivate your furnace and clean your flame sensor, electric ignitor, burners, pilot light, flame sensor, and thermocouple. It’s important to keep your furnace clean to prevent a toxic gas leak.
If the CO levels in your furnace are 400 ppm or higher, call a licensed technician prior to having an anxiety attack. Depending on the type of gas furnace you purchased, it may be normal for it to produce a CO level that exceeds 400 ppm. For example, an energy-efficient condensing furnace is engineered to generate CO levels that range from 100 to 1,000 ppm. Once the furnace has been operating for 5 minutes, its CO level will start to decline to a value that is below 100 ppm. We offer dependable furnace tune-up services to prevent dangerous gas leaks in houses. Our staff of technicians will utilize an electric combustion inspection tool to measure the CO ratings at the beginning, middle, and end of the heating cycle.
Analyze the Flame Sensor
We will use a multimeter to measure the output of the electric control panel that is integrated with the flame sensor. If your furnace is operating correctly, the output of the flame sensor will vary from 1.5 to 4 uA. Our team of certified technicians provides furnace tune-up services to help you verify the condition of your flame sensor. To ensure your furnace can fulfill a standard heating cycle, we will replace or repair a flame sensor with an output that is below 1 uA.
Inspect the Gas Pipes & Valve
A gas furnace is equipped with a gas valve and pipes that are designed to distribute natural gas to an electric ignitor or pilot light. As a furnace reaches the middle of its life cycle, it is not abnormal to encounter issues with the gas valve. If the gas valve becomes stuck at the beginning of the heating cycle, the gas burners in your furnace will not receive enough natural gas. This will negatively impact the production of warm air in your furnace. To help you prepare for the cold weather, our team will inspect the gas valve in your furnace during your annual furnace tune-up. In addition, we will check the condition of your gas pipes to prevent the formation of cracks.
Check the Gas Pressure
When the gas pressure in a furnace is low, the electric ignitor and gas burners will struggle to produce flames. If your furnace is not producing enough warm air, give our team a call by phone at (732) 201-3305 to become familiar with our furnace tune-up services. To measure the gas pressure, our technicians will connect a manometer to the gas valve in your furnace. An average furnace will produce a gas pressure that ranges from 3.2 inches WC to 3.7 inches WC. We have the tools necessary to adjust the gas pressure of your furnace. Our staff can increase or decrease the gas pressure to improve the circulation of warm air in your house.
Has Your System Been Sitting in Idle for Months? Schedule a Furnace Tune-Up Today
If your heating system has been unused for several months, or if it has even been over a year since you utilized our furnace tune-up services near you, let the professionals at Team Electric service it so that you don’t have to face breakdowns and money loss. Our team of professional HVAC contractors offer furnace tune-up services in locations such as Monmouth County, Camden County, Middlesex County, Union County, and Camden County. When New Jersey’s winter chill comes, you’ll be thankful you did!
Make sure to ask us about our service plans to learn more about how we can help you keep your heating, air conditioning and plumbing up to date and working properly. In addition to furnace tune-up services, our team also offers other solutions such as furnace repair and installation. In addition, we also provider boiler repair and installation options for homes.
Our furnace tune-up services near you are 100% GUARANTEED! If any repairs are needed during the fall or winter season, we’ll REFUND the full cost of the furnace tune-up.
- Only takes 1 hour
- Only need to do it 1 a year
- It will save you THOUSANDS on unnecessary repairs
- Heater will last longer
- Run more efficiently
- Lower energy bills
- Keep your home more comfortable
- 100% Money-Back Guarantee
Types of Gas Furnaces
A gas furnace utilizes a pilot light or electronic ignition system to create a reaction inside a set of burners of a chamber. Next, a heat exchanger collects the warm air produced prior to it being transferred to the plenum of the gas heating system.
All conditioned air produced during the standard heating process is transmitted throughout the home utilizing a network of duct work. Prior to purchasing a gas furnace, it is important to be familiar with each type on the market. Keep reading to learn more about the benefits of each type of gas heating system.
Single Stage Gas Furnaces
A single stage gas furnace is engineered with a valve that pushes the available gas supply to the burners and pilot light. The valve on this type of furnace is able to be opened and closed throughout standard operation. Each of the burners in the gas furnace provides warm air to the heat exchanger.
Once the air is processed by the exchanger, a fan is utilized to diffuse the supply of heat energy through the house. A gas furnace relies on a collection of return vents to attract stale air for heating or processing. If you need assistance with a furnace repair or tune-up, book an appointment with our team.
Two Stage Gas Furnaces
Two stage gas furnaces include a gas valve that is able to be fully or partially opened to meet the heating demands of your home. Once an enclosure reaches a predefined temperature set by the thermostat, this type of gas furnace will close the gas valve to end the heating cycle.
The three functions provided by a two-stage furnace provide low and high heating cycles that are designed to resolve issues such as cold spots, uneven heating, and high utility bills. The thermostat and furnace are engineered to adjust the valve channel in response to outdoor weather conditions.
On a frigid day, the furnace will open the valve completely to provide your house with the necessary heat energy to fight the cold temperatures outside. On the other hand, the furnace will adjust the valve to a partially closed channel during a warmer day. Would you like to invest in a two-stage gas furnace for your home? Team Electric provides furnace tune-up, repair, and installation services to homes in New Jersey. Give us a call by phone at (732) 201-3305 or schedule an appointment online to receive assistance.
Modulating Gas Furnaces
Modulating gas furnaces are designed to eliminate varying temperature ranges throughout the home that are caused by single stage furnaces. Basic furnaces include two operating functions, activation or deactivation. On the other hand, modulating gas furnaces feature high and low heating output channels to reduce temperature fluctuations in your home.
This type of furnace will produce minimal noise throughout the standard heating cycle. Since this type of furnace is continuously operating throughout the day, it is able to achieve an Annual Fuel Utilization Efficiency (AFUE) Rating of 98% or lower.
Modulating gas furnaces are able to monitor the exact amount of gas being utilized based on instructions from the thermostat. These heating systems take advantage of a gas valve and multi-speed fan to adjust the total heat output throughout the day. If you’re having issues with your modulating furnace, book a furnace tune-up or service appointment with our team in New Jersey.
Furnace Components FAQ Questions
Contact Us Today!